MATERIALS HEALTH, SAFETY AND ENVIRONMENTAL SHEET RESIN COATED, KNITTED FIBERGLASS, WATER ACTIVATED
REPAIR TAPE Prepared 06/01/05
PIPE REPAIR TAPE
INGREDIENTS
C.A.S. NO.
PERCENT
EXPOSURE LIMITS
Fiber Glass
65997-17-3
48-52
4,4’ - Diphenylmethane diisocyanate
Other MDI isomers and oligomers
101-68-8
34-38
8-hour time weighted average (TWA) 0.005
Amine catalyst
6425-39-4
1-5
Methane Sulfonic Acid
75-75-2
<1
Other ingredients not precisely identified (including Polyethylene glycols)
are proprietary and nonhazardous.
<12
SOURCE OF EXPOSURE LIMIT DATA--ACGIH (American
Conference of Governmental Industrial Hygienists)
THRESHOLD LIMIT VALUES ABBREVIATIONS:
N/A - NOT APPLICABLE
Product Name: STOP IT® Repair Tape
For Further Information Contact:
Telephone Number (713) 977-4100
Producer's Name: InduMar Products, Inc.
Address: PO Box 770008
Houston,
Texas 77215-0008
Office: (713) 977-4100
PHYSICAL STATE: Tacky resin on a fiberglass
substrate
ODOUR: Very slight
FLASH POINT: 440º F./227º C.
Flash Back DOES NOT OCCUR.
Recommended extinguishing media:
CO², dry chemical or foam
COLOR: white/yellowish, also black (uncured product)
Method: Closed Cup
No unusual fire or explosion hazards.
Decomposition/Combustion products:
Carbon dioxide, carbon monoxide and
traces of oxides of nitrogen
Hazardous Polymerization WILL NOT OCCUR. Product will not violently
react with air or water.
Toxic Products will not form. Product
is stable, not a hazardous waste.
Recommended storage conditions: Optimum
40-80º F./4-27º C.
RECOMMENDED WASTE DISPOSAL METHOD:
Solid waste landfill or authorized
incineration.
PERSONAL PROTECTION: Apply in well
ventilated area. Protective clothing
for normal application: Latex or
plastic gloves. Eye protection for
normal application: Safety glasses.
Special fire fighting procedures:
Wear self-contained breathing apparatus.
STOP IT® polyurethane resin
will adhere to clothing. STOP IT®
polyurethane resin will not cause
skin bond.
NOT FOR INTERNAL CONSUMPTION. KEEP
AWAY FROM CHILDREN.
HEALTH DATA SHORT TERM EXPOSURE
Route
of
entry
Description of effect
Minimum
concentration
for effect
Inhalation
Skin
Eyes
Ingestion
No significant inhalation
hazard upon removal of cured material.
Isocyanate vapors of uncured material below
detectable limits.
Contact: Modified human draize patch test: Product
is neither an irritant nor an allergen.
Absorption: Acute dermal LD50 > 2.0g/kg, no
reaction at this dose. Cured and uncured products
are not expected to be sensitizing when used
as directed.
Avoid contact; uncured material is not expected
to be an irritant when
used as directed.
Oral LD50 > 5g/kg; no mortalities,
or untoward behavior reactions
were noted.
LONG TERM EFFECTS: May be slightly irritating to unprotected skin.
EMERGENCY AND FIRST AID PROCEDURES:
Inhalation: Provide fresh air, if breathing
becomes difficult, call a physician.
Skin: Wash thoroughly with soap and water.
Eyes: Wash immediately with plenty of water
and consult a physician.
Ingestion: Unlikely route. Drink plenty of water. Do not induce
vomiting.
Consult
a nurse or physician. (Keep out of reach of children).
IMPORTANT NOTICE TO PURCHASER:
All statements, technical information and recommendations contained
herein are based on information and tests we believe to be reliable.
The accuracy or completeness thereof are not guaranteed. In accordance
with "Terms and Conditions of Sale" and since conditions of
use are outside our control, the purchaser should determine the
suitability of the product for his/her intended use and assumes
all risks and liability whatsoever in connection therewith.
Norab Services Limited - Your Source for InduMar Products
UK Toll Free Tel: (0)800 092 0725 | e-mail: info@norab.eu